HOME HOME HOME
ABOUT US ABOUT US ABOUT US
PRODUCTS PRODUCTS PRODUCTS
NEWS NEWS NEWS
MESSAGES MESSAGES MESSAGES
CONTACT US CONTACT US CONTACT US
NEWS
Industry News
Company News
Return home
Airport Engineering: What is the TLOF Lighting System?
2018-05-03
What is a TLOF lighting system? The airport project will tell you today that for nighttime heliports, a TLOF lighting system should be set up. However, when the track-type FATO coincides with the TLOF;it may not be set. The surface TLOF lighting system of the heliport is mainly illuminated by sidelights, floodlights, spaced point light arrays (ASPSL) or light-emitting panel (LP) lighting (when it is difficult to set up edge or floodlights with FATO lamps) A variety of lighting systems or several components;TLOF lighting systems for elevated heliports or helicopter platforms should include: edge lights, floodlights, and/or spaced point light arrays (ASPSL) and/or light-emitting-plate (LP) lighting.
Airport Engineering: Ground Taxiway Signs and Markers
Helicopter ground taxiways should be marked with a midline sign; if the edges are not obvious, edge markers or signs should also be set. Ground taxiway signs and signs should meet the following requirements. 1. The midline and sideline signs of the helicopter ground taxiway shall comply with the relevant provisions of the taxiway markings in the Technical Standard for Civil Airport Flight Areas (MH 5001)， Where it is necessary to indicate that the helicopter ground taxiway is only suitable for use at airports where helicopters are used, signs must be set up at the airport.
Airport Project Sharing: Heliport Major Facilities Information
The data that a heliport needs to measure or specify should usually include the following: (1) type of heliport. (2) Earthing and off-site dimensions (accuracy to meters), slope, surface type, bearing strength (in tons). (3) Type, true direction (accuracy to one hundredth degree). identification number, length and width of the final approach and takeoff zone (accurate
Sharing Regulations on Civil Airport Engineering Construction Licenses
(promulgated by China Civil Aviation Administration Order No. 43 on August 26, 1995) Article 1 These regulations are formulated in order to strengthen the construction management of civil airport projects, improve project quality, and ensure flight safety. Article 2 This regulation applies to the following construction projects for civil airports (including the civilian part of the military-civilian cooperative airport, the same below) newly built, reconstructed or expanded:
What is a TLOF lighting system? The airport project will tell you today that for nighttime heliports.a TLOF lighting system should be set up，However, when the track-type FATO coincides with the TLOF. it may not be set. The surface TLOF lighting system of the heliport is mainly illuminated by sidelights, floodlights. spaced point light arrays (ASPSL) or light-emitting panel (LP) lighting (when it is difficult to set up edge or floodlights with FATO lamps) A variety of lighting systems or several components' TLOF lighting systems for elevated heliports or helicopter platforms should include: edge lights, floodlights, and/or spaced point light arrays (ASPSL) and/or light-emitting-plate (LP) lighting.
